Cleaning Brass Sheet Metal: How to Keep Your Projects Looking Great

COA14

Made from a combination of copper and zinc, brass is one of the most popular materials used in metal works. Brass sheet metal, in particular, is widely used in a variety of applications, from decorative pieces to mechanical applications. In fact, you have probably worked with brass sheet metal as part of a project.

Many hobbyists will likely have more than a handful of their projects on display at home where the properties of the metal tend to shine. However, brass sheet metal will lose its luster over time, requiring you to clean it every now and then. The problem is that sheet metal tends to be quite thin. As such, they require a lot of care when cleaning. Otherwise, there’s a significant risk of you damaging the sheet metal you’ve used.

Fortunately, cleaning brass sheet metal is a relatively simple task. This is especially true if the brass sheet metal you used for your project was sourced from respected suppliers like Rotax Metals, assuring you that the quality of the brass is top-notch. With that in mind, here are a few cleaning tips to help make sure your projects stay pristine. Read more from this article: http://www.rotaxmetals.net/cleaning-brass-sheet-metal-how-to-keep-your-projects-looking-great/.

Advertisements

4 Myths about Brass Sheet Metal that Has to End Once and for All

COA14

Every once in a while, you come across pieces of information that are obvious hoax. Yet your lack of knowledge about the subject causes you to easily believe them. Depending on how convinced you are that what you’ve learned is a fact, you may be tempted to pass it on to the next person. That gives birth to a myth, and it’s too dangerous to let one perpetuate.

Even in the world of metals, myth is commonplace. After all, not very many people find metals interesting, so it’s easy to confuse facts with cons. One particular metal that has been a popular subject of misconception since its discovery several thousand years age is brass. Here are some misconceptions about brass that need to be debunked once and for all.

Myth #1: Only for Decorative Purposes

There’s no denying the elegant appearance of brass. Not only does it resemble gold, but each of its many variations comes in a unique, attractive hue. However, this doesn’t mean that brass is only utilized for decorative applications. In fact, its ornate qualities are only its secondary advantage. Brass is primarily prized for its strength, corrosion resistance, and machinability among many other properties. Read more from this article: http://www.rotaxmetals.net/4-myths-about-brass-sheet-metal-that-has-to-end-once-and-for-all/.

How to Differentiate Copper from Brass Sheet Metal

Copper and brass sheet metal are used for a number of different applications. The sheets can be used as a part of architectural detail or sometimes for added aesthetic flare. The tricky thing about copper and brass is that sometimes they can look too similar. This can be problematic when someone is looking for specific properties of either copper or brass.

7

Using the wrong type of sheet metal can have disastrous effects, especially when the sheets are required to hold any form of structural integrity. Before using any sheet metals for your next projects, try these tricks to differentiate brass from copper:

Continue reading

Scrap Metal Basics: How and Why You Should Recycle Brass Sheet Metal

Different Types Scrap Metals Sorted into Piles for Efficient Rec

In a world where eco-friendly solutions are fast becoming the norm, reusing and recycling are among the ways to cut down on waste. While many concentrate on collecting plastic bottles, cartons, and newspapers, there is one item that is prized above the rest: metals.

Metal recycling is a lucrative business. Such items like an old brass sheet metal, copper pipes, and aluminum tubes have a higher value that other materials because of their uses in various major applications. Here’s a step-by-step guide to recycling metal:

Step #1: Collection – Unlike other types of waste, used metals are found in scrap yards instead of the landfill. Homes that have gone through recent renovations may have scrap brass, copper, bronze, etc., laying around perfect for recycling. Read more from this article: http://bit.ly/2pIuOIA

Steps to Take When Cleaning and Polishing Brass Sheet Metal to Avoid Damaging It

COA14

Brass is produced by combining copper and zinc, two widely used metals that boast of a great deal of useful properties. It is no wonder that this reddish metal is malleable, strong, and resistant to corrosion and heat. This makes brass a popular material for making plumbing fittings as well as decorative items.

Despite having high corrosion resistance, brass is not immune to tarnishing. After constant use and exposure to oxygen, it will eventually lose its luster. Brass sheet metal is one of those items that require polishing and care to keep its elegant gleam. However, it is also one of the more sensitive brass items, so extra caution must be practiced when cleaning or polishing it. For those who are scared to clean their brass sheets, simply follow this guide:

Step 1: Do the Brass Test

Before you embark on your cleaning mission, make sure to test whether you have real brass or if it is a metal sheet. If a magnet sticks to the plate, it is metal; if it does not, it is brass. If you are dealing with a metal sheet that only has a coating of brass, you must proceed with the next steps with even more caution, as too much cleaning and polishing can scratch and damage the cladding. Read more from this article: http://bit.ly/2EYBad3

Prepare Your Home for Sale–Bring Back the Sheen of Your Brass Sheet Metal Fixtures

7

If you are planning to sell your house soon, it is imperative that your brass sheet metal hardware and fixtures, as well as all the other details look dashing. Well-polished metal furniture and trim can easily attract prospective buyers who are looking for the property in your neighborhood that will give them the most value for their money.

 

The craftsmanship required to create such elaborate decorative elements in both the bathroom and the kitchen is one of the things that get noticed first. It exudes a rather interesting ambience that turns even the simplest of interiors into head-turner ones for buyers during the regular tour.

 

If you don’t have these metallic elements in your home for sale, perhaps it’s about time you start installing one. Before you start shopping around for these new additions to your home interior design, it is important to consider several important factors so that you can make an educated decision.

 

Antique Craft

 

Classic-looking brass with solid metal craftsmanship is always preferred to lightweight fixtures that break and rust easily. Designers and copper manufacturer work with brass because it is naturally versatile. They are strong and sturdy and can be built and shaped into all forms. Brass sheet metal is unique and cannot be compared to faux metals that you can find in many poor-quality products these days.

 

Durability and Function

 

Whether you’re renovating your kitchen or simply updating your bathroom, you have to pay attention to the brass elements either room has, which include the faucets, door knobs, trims, and railings. If they seem already old but still intact and can be restored, just polish them until you restore their original sheen. If you want them replaced, on the other hand, make sure to get genuine brass replacement, as these are more durable than their faux counterparts.

 

Function is major, but durability of material is even more important for the connoisseur of a well-built home. After all, it really is in the “eye of the beholder” whether that home gets sold or stays on the market.

 

Brass sheet metal is sometimes also used when making fine jewelry pieces and high-end pots that will remain forever. It is also important to maintain and take good care of these possessions so that they will last a very long time.

 

Keep Them Shining

 

Polishing antique furniture and fixtures to keep them clean and bright is another thing you should take into account. There are many homemade and over-the-counter products, which can be used to bring back the original look to that old, tarnished candle-holder or put a shine to that historic brass frying pan you inherited from your great grandmother.

 

Many brass and copper pieces are exposed to natural elements that create a distinct tarnish. Moisture and humidity are the number one causes of this chemical change of the surface of brass. Once the damage is done, it will be hard to bring back the metal’s luster. Make sure you use non-abrasive soft cloths and non-corrosive products when you clean these metal products. Baking soda and white vinegar are used in most cases, since they are natural and less damaging.

 

Copper versus Brass

 

Both copper and brass have classic looks, although brass is taking over in sales of materials made from this metal, due to its durability. It is also somewhat a bit more affordable in pricing. Many leaded brass-plates can be engraved upon. Meter gears are manufactured from brass to be used in clocks.

 

Brass sheets are sold in high volume to designers and craftsmen who carefully use them for manufacturing quality and precious earrings, necklaces, rings and bracelets, as well as exclusive designer artifacts.

 

 

Sources:

Can you make something like this? Can you do something like that?
We bring such wishes to life, kyoseiltd.co.jp

Brass Sheet Metal—Copper and Zinc: Where Brass Owes Its Amazing Properties

Brass Sheet Metal Owes Its Incredible Properties to Copper and Zinc

Have you ever seen a gold-like metal in your home and thought “this can’t be gold”? Well, you were probably right about the metal being “fake gold” (unless you’re really squirreling such a precious metal in your house), but it’s not actually the kind of fake you should disdain. That material is most likely “brass”, another kind of metal that looks like gold because of its shiny, yellowish appearance.

Brass refers to a group of copper-zinc alloys that is used for many architectural, structural, and industrial applications. The history of this metal’s name is unclear but it was believed to be derived from three different terms—the Arabian word Latun, which means copper; the Turkish word Altun, which means gold; and the old English word Braes, which means bronze. Read more from this article: http://bit.ly/2BUzT9A